Drilling Fluid Solids Control Centrifuge can Meet With Different Requirements

The mud separation process between solid phase and liquid phase is completed in the roller. Decanter centrifuge separation principle is to use high-speed rotating roller driven into the mud in the high speed rotating drum, mud was dumped into the wall to form a liquid circle, solid phased particles of liquid ring get greater than its own gravity for undreds or even thousands of times the effect of centrifuges force, will overcome the resistance of the slurry viscosity to the roller on the inner wall of rapid subsidence formed solid layer, liquid forming liquid layer.

Actually, in drilling rig solids control system centrifuge is the most complicated one. It is rather difficult for operator get leagal operation, etc. However, in long term its important position is following shale shaker subsequently. At the beginning, centrifuge used in solids control process for drilling fluid is from chemical or food industry. No matter the separation particle size or treating capacity can’t meet drilling fluid process requirements.

KOSUN oilfield drilling mud decanting centrifuge can meet with different requirements of mud treatment under various drilling condition, that can do sedimentation and separation for particles more than 2 um. After treatment, the mud can achieve ideal viscosity and proportion, results in better recycling, high efficiency, saving and environment protection.

If you are interested in KOSUN drilling fluid solids control-centrifuge, you can click the website: http://www.kosun.us/solids-control-equipment/decanter-centrifuge.html and the other url is: http://www.kosungroup.com/products/solids-control-equipment/dc-series-decanter-centrifuge.html, we are also wormly welcome you write to us to consult about the drilling waste management equipment and services with the email: kosun@adkosun.com.