How to Adjust the Hydrocyclone Desander?

Hydrocyclone is the one of the indispensable part of desander for separating solids. Desander is an important drilling solids control equipment, it is used as the second or third stage in the whole drilling fluids purification system. As the important part of the desander, hydrocyclone in different specifications work against different diameters and for different cleannesses. Moreover, separation capacity is closely related with hydrocyclone diameter since larger diameter is aimed at larger particles while smaller one contends with smaller particles.

Then how to adjust the Hydrocyclone Desander?

As the pioneer in this industry KOSUN Machinery Co., Ltd. will share the operating principle for you here!

I. Matters Needing Attention in Adjustment:

1. It is not allowed to decommission the desander out of personal will.

2. It is proper to install the desander behind the untra-deepwater pump.

3. The system may automatically pause periodically or seasonally. Before that happens, certain amount of corrosion inhibitors or excessive high water level protection can be applied to reduce corrosion and protect system.

II. Installation & Maintenance:

1. Desander ought to be installed on a well-prepared, flat foundation or merely on the ground. Then three expansion bolts are adequate to keep the base stable on the foundation built with concrete, which has a round or square surface and is 150mm high.

2. Take notice of the pipelines and flow directions in the installation.

Desander is an important drilling solids control equipment, it is used as the second or third stage in the whole drilling fluids purification system. The most common cone is in 8” or 10”, mainly separating the solids in 47-76 μm from the drilling fluids. According to your treating capacity, you can choose the quantity of cones for desander.

Besides the products KOSUN can provide for oilfield and drilling fluid processing system including drilling fluid shale shaker, drilling fluid mud cleaner, desander, desilter, drilling fluids decanter centrifuge, vacuum degasser, mud tanks, mud gun, mud agitator, drilling mud centrifugal pumps and all the other solids control equipment, complete solids control system, etc.