However,the drilling mud desander often used in the extremely cold area in winter,just like the Russia, Iraq,ect.In general speaking,the temperature in this area is about -30°~ -40°in winter,so for the solids control equipment,it must be withstanded the extremely low temperature.But the KOSUN drilling mud desander can do it!
Drilling mud desander as the second stage of the solids control equipment are play a important role in the solids control system, so the daily maintenance and the normal application is also very important, then the following is some point of how to maintenance and use the drilling mud desander in normal:
1.In general case, shale shaker can use of 1420 r/min, when the underflow high sand content, belt can be adjusted through, will speed switch to 1664 r/min.
2.Shaft vibration on both sides of the bearing with hollow shaft connection bolts for high strength bolt, do not replace with ordinary bolts, in use should be regularly check cannot have loose phenomenon.
3.Motor should be regular inspection and cleaning, the shell shall not be piled up dust, shall not be leading water jet cleaning machine.
4.Vibration above the shaft bearing is equipped with oil cup, per shift and second-rate molybdenum a grease, bearing in good lubrication condition.
5.Shale shaker screen replacement: when replacing the sieve, should cut off power supply first, then loosen the lock nut at the ends of the drum shaft cover shape along the axial tap nut locking bolt back, and then use the drum shaft special spanner rotating drum shaft, can make screen relaxation.
KOSUN as a professional oilfield drilling mud desander supplier and manufacturer in China solids control industry,it is a leader and is capable of providing customers with series products ,such as oil & gas drilling fluid solids control equipment, oilfield decanter centrifuge, drilling waste management equipment and drilling security equipment.
没有评论:
发表评论