KOSUN can Design and Product the Good Mud Gun without Rusting Up and Blowing Out

The mud gun is installed inside the mud tank, hence the opening on the mud gun line would be inner the tank for simple connecting with mud gun terminals. Although, the clean water line has numerous opening on Mud Tank (Visit here to get a price list of the Mud Tank) major surface, the mud engineer would connect the water line by using a tap and control by a valve.

The mud gun line could be laid on each mud tank within the mud program in order that the mud might be transferred to each and every mud tank compartment. Always, the mud gun line would occupy 1 length and 1 width in the tank top rated structure steel tube, amongst different tanks, the mud gun line will be connected by hose. To prevent confusion, the mud gun line would be laid at same side on the mud tank, whilst the clean water line is selected because the counter sides.

In most drilling sites, there are always have a problem that the mud gun always tendency to rust up, plug up, blow out nozzles etc.But the mud gun in KOSUN can put the end to the occurrence of this kind of problem.Comparing traditional type,KOSUN may offer the client new type of mud guns,that is rotate style.The rotate mud gun is equipped with gate valve for better performance,and has a good command of nozzle pressure,whether the user connected mud gun to mud pump,or connected to feed pump.The rotation angle is 360°,that ensure no dead-end corner in mud tank and greatly enhance flushing effect.

KOSUN is an oil mud gun manufacturer and supply MG series mud gun. Mud gun is used to provide supplemental or primary mixing in mud tanks depending on the number being used and the pit size. Oil mud guns are best used in tank corners to keep solids from settling with a mud agitator placed in the tank center. The mud gun in the mud solids control system is also used to transfer mud from compartment to compartment, like for trip tank compartment.